Loading... Please wait...

About

PVC Bendit offers portability, affordability, and capability far exceeding anything else on the market when it comes to bending PVC pipe. PVC users who previously shied away from purchasing benders, due to cost, lack of capability, and/or portability, now have a product that they can afford and one that will enable them to expand their concept of how PVC can be used.

PVC Bendit is the Best PVC Bending Tool

Capability

PVC Bendit offers the longest PVC pipe bender on the market. Each series of bender has a wide range of diameters of pipe that it will work with. PVC Bendit’s revolutionary design heats pipe from the inside, allowing it to soften uniformly, which makes it easier to bend schedule 40 and/or 80 PVC, PEX, PTFE Teflon or acrylic tubing. That means a wider range of bends, compound bends and more without kinking the pipe wall. It can also be used to bend sheet materials like ABS and polycarbonate.

SERIES A PVC BENDIT

The Series A benders will handle pipes from half inch and larger.

SERIES B PVC BENDIT

The Series B has an outside diameter of 1.06" so it works with a range of pipe that has a minimum inside diameter of 1 1/4 inches.  It works well will all sizes including 4 inch pipe. 

LENGTH OF PVC BENDITS

Bendits come in 3, 6, 9 and 18 foot lengths.  The reason for this is, for some projects the 3 foot will meet or exceed the length of the desired bend while longer lengths allow the Bendit to be inserted further into longer lengths of pipe so the full bend can be achieved.

Warranty

PVC Bendits come with a 1 year parts and labor warranty.  If your PVC Bendit fails simply contact us and we will work with you to have it repaired or replaced.

Affordability

PVC Bendits are not the cheapest bending tools and certainly not the most expensive either. One expense is for Canadian-U.S. Safety Testing and approval.  CSA is a National Regulatory Testing Laboratory "NRLT" similar to UL.  The cost of obtaining the 'CSA Listing' is very significant for a product like this... over $15,000.  In addition to the initial fee for testing to ensure the product meets or exceeds CSA Standards, CSA charges an annual listing fee of over $4,000 and $925 a quarter factory inspection fee.  Our insurance company requires listing by an NRTL.  It is your safety that we are concerned with and that is why this product is listed with CSA.

You can spend a thousand bucks on a heavy box that'll heat a 4ft length of pipe. Or, you can buy a moderately priced tool that will allow you to bend PVC effectively at lengths that are impossible with other tools and can handle many different gauges with the same bender. That tool is the PVC Bendit. Affordable bending is now at hand.

Portability

You don't have to have a big, bulky box or a dozen different benders to bend PVC effectively. Whether you're a tradesman on the move, an event designer or a home-based do it yourselfer, it helps to have one tool for the job. The best tools are the right size and weight for what you expect to accomplish. PVC Bendit is compact and light, the whole package weighing just a few pounds, and small enough to carry around in a shoulder bag. At the same time, the PVC Bendit is ruggedly built from brushed, galvanized steel, so you can toss it in the back of the truck without worrying about it. 

Intro Video: PVC Bendit

To watch more PVC Bendit demonstrations and instruction videos, click here.

PVC Bendit is for Everyone

  • Event Decorators
  • Balloon Event Decorating Companies
  • Movie and Stage Set Builders
  • Pool and Spa Repair Contractors
  • Plastics Fabricators
  • Water Fountain Companies
  • Equipment Manufacturers
  • Electrical Contractors
  • Car Washes
  • Home Remodelers
  • Handymen
  • Cable Installation
  • Datacom Technicians
  • Landscapers
  • Sprinkler System Installers
  • Grounds Maintenance
  • College Art Dept
  • Parks & Recreation Dept
  • Golf Courses
  • Alarm System Installers
  • Swimming Pool Installers
  • Fire Sprinkler Systems
  • Structural / Agricultural
  • Medical Equipment Mfrs
  • Theatre Groups
  • Art Teachers
  • High School Art Dept
  • Art Schools
  • Designers
  • Chefs
  • Art Supplies Stores
  • Disaster Relief Orgs
  • Theme Parks
  • Nurseries
  • Greenhouse Builders
  • Patio Furniture Builders
  • Hobby Farmers
  • Magicians
  • Event Planners

Made in the USA

PVC BENDIT - Buy One NOW!

PVC Bendit is a tool designed specifically to bend PVC pipe, acrylic tubing, and thermoplastic sheets. It is a single, simple tool kit that provides you everything you need to start bending. PVC Bendit is offered in several different diameters and lengths. The lengths shown always refer to the “net bendable length” of the unit. That is to say, for example a 3 foot model will have a heated portion equal to 36 inches. Because of the cool grips on each end of the units, the overall length is greater than the heated area. Hence, a 3 foot unit will have an overall length of 50 inches, with 36 of those inches providing heat. All models the net bendable length in their name. One day, this will be the worldwide standard for bending PVC and other plastic pipes. Please note. Although shown in the slideshow the Hot Tool is no longer included or available.  Also the build-a-bends and sleeves are no longer sold.  We suggest watching the new YouTube videos - How to bend 4" PVC Pipe and How to bend 6" PVC Pipe - and how we place pieces of metal conduit inside the PVC pipe while positioning the PVC Bendit in the center so the heat radiates out from the center to heat more evenly and to make better bends.

 

Sign up to our newsletter

Recent Updates